FLEXI-GROUT™
A permanently flexible premixed grout for Glazed Tiles, Bricks and Impervious Stone
Flexi-Grout can be used straight from the bucket onto glazed tiles and impervious stone surfaces.
Relying on a unique alkaline curing chemistry, Flexi-Grout is highly water resistant and colour-fast.
- Unused product can be stored in the bucket for future use
- Store in a cool area
- Wash-up hands and tools with water
Application Instructions
Upon opening the bucket Flexi-Grout will wet-up when stirred with a trowel. Do not mechanically mix, do not add water.
Using a suitable grouting tool, work Flexi-Grout into grout joins.
Using a suitable moist sponge clean Flexi-Grout from tile or stone surface, cleaning out sponge at regular intervals.
On hot days, to avoid Flexi-Grout sticking to tile or stone surface, reduce application area before cleaning.
Cure can be accelerated in colder conditions, or when rain is imminent, by adding cement. Mix in with a trowel at a ratio of 1 to 10. Use white or ivory cement for lighter colours and grey for dark colours.
Grout System for Stone, Drives and Concrete Floors
Health and safety
Flexi-Grout is a water based organic product. It is not based on noxious solvents and hydrocarbons. It is safe to use, provided normal common sense precautions are observed.
Eye contact. Irrigate eyes with water, and consult a doctor if irritation persists.
Skin contact. Avoid prolonged skin contact. Wash from skin with warm soapy water.
Disclaimer
Intending Users Should First Verify The Suitability Of This Product For The Intended Purpose.
The product is intended for use by tradesmen only, and it is essential that all work be carried out using good construction practice. The use of the product is beyond the manufacturers control. The liability is restricted to replacement of product proven faulty. The manufacturer is not responsible for any damage arising from the incorrect use of this product.