Flexco
 

Roofwash

An aqueous solution in concentrated form, for use as a cleaner to remove moss, mould and lichen from roofs, walls and paths..

Specification

Appearance @ 20 C  clear pale liquid
% active content w/w 50.0  - 52.0
% free amine 1.0 max
pH 10% solution 6.5 – 8.5

Typical Properties

S.G @ 20 C 0.98
Boiling Point 100 C
Flashpoint not flammable

Application

Specifically formulated to give reduced foaming for use in applications where foam generation can cause problems such as during pumping, spraying, bottle filling etc.

Highly efficient broad spectrum, quaternary germicide with major applications in the field of disinfectants and sanitisers. It has additional specialized industrial applications as an emulsifier and in the textile industry.

Excellent for use as a cleaner for roofs, walls and paths.

Can be diluted in a ratio up to 1 : 50 with water.

Disclaimer
Flexco can only give recommendations on the use of its products, and cannot control their use by tradesmen.

Flexco will not be responsible for product washout due to water ingress from rain or sprinklers prior to their cure. It is the subcontractors responsibility to ensure there has been sufficient cure time of the products prior to traffic, and that all precautions are taken to avoid ingress of water from rain etc.

Flexco is not responsible for engineering, and specific or architectural design and specification for fixings and control joints etc.

 
Links | Email | Home | Top

Flexco - Solving Tomorrow's Building Problems - Today!     © Copyright RLA Polymers NZ Ltd, 2016-2017.
Flexco is a division of RLA Polymers NZ Ltd. Phone: +64 (9) 267 2772. Street Address: 24-28 Lady Ruby Drive, East Tamaki, Auckland. Mailing Address: PO Box 64207, Botany, Auckland 2163, New Zealand.